E-Mu PROTEUS FX Bedienungsanleitung PDF herunterladen (Seite 60)

5 - Effects

Programming Effects

60 Proteus VX Operation Manual

Programming Effects

Adding an Aux Effect in the Multisetup

Some banks (Proteus X Composer, for example) are already programmed to use

Proteus VX soft effects. These instructions explain how to add Aux Effects to a

Proteus VX bank which does not already have soft effects programmed.

The Aux Effects are designed to be used as sidechain effects applied on all presets in the

bank. See the diagram on page 62

for a complete description of the effects routing.

 How to Add an Aux Effect

1. Select the Multisetup Page by clicking the Proteus VX icon at the top of the tree.

2. Locate the Aux Outputs section in the lower right part of the window and make

sure all the Aux Outputs are set to Bus 1 as shown below. (This is done so all the

outputs go to the same place.)

3. Click on the Aux 1 button at the top right of the screen if it’s not already selected.

The Aux 1 effect appears in the TV screen.

4. Click on the Effect Select Icon at the top right corner of the Effects TV screen. A

list of available effects drops down.

5. Select one of the Effects from the list.

6. Turn up the FXA knob in the MIDI controllers section to hear the effect.

(FXA is located on Controller N.)

7. Change the effect parameters to suit your own taste, or change the entire effect for

that matter. Keep in mind that the changes you make will affect ALL the presets in

the bank.

8. Save the bank if you want to keep your changes.

Proteus VX icon

Effect Select icon

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 133 134

Keine Kommentare

E-Mu PROTEUS FX Bedienungsanleitung Seite 60