E-Mu SP-12 Bedienungsanleitung PDF herunterladen (Seite 19)

SP-12 Librarian User’s Manual Messages And Errors

Water’s Edge Software

Page 19

“File Name” could not be opened. File version can't be read by this

application.

The file, whose name is indicated by

File Name

, could not be opened

because it was created by a newer version of the SP-12 Librarian. This

error is a result of creating or updating a file with a newer version of the

SP-12 Librarian, then using an older version of the librarian.

If you are sure that you have not somehow reverted to using an older

version of the SP-12 Librarian, then the file in question has somehow

been damaged.

“File Name” could not be opened. I/O error.

The file, whose name is indicated by

File Name

, could not be opened

because a serious disk error has occurred. Your disk, or disk drive could

be damaged.

Quit the SP-12 Librarian and restart the Macintosh. Try the same

operation again. If you can’t reproduce the problem, it was probably just a

temporary glitch. Keep your guard up in case it happens again.

If you do reproduce the problem, or if it comes up again at another time,

suspect the disk first. For floppy disks, use The Finder to copy valid files to

another floppy. Don’t back up the floppy, since you may back up the fault

with it. Discard the bad floppy disk. With hard disks, remove all your valid

data, re-format the hard disk, then copy your files back onto the hard disk.

If the problem persists on a specific drive, have it checked out by a service

technician.

“File Name” could not be opened. Only one catalog can be open at a time.

The Sound Catalog, whose name is indicated by

File Name

, could not be

opened because only one Sound Catalog can be open at a time.

If you are maintaining several versions of the Sound Catalog, close the old

Sound Catalog before opening the new one.

“File Name” could not be saved. Disk is full.

The file, whose name is indicated by

File Name

, could not be saved

because the disk is full, or there is not enough space available on that disk

to save the required file.

Use the File menu’s

Save As

command to save the file on another disk.

If the file is your Sound Catalog, quit the SP-12 Librarian and copy the

catalog to another (blank) disk, then delete the original catalog. You will

then have to update the catalog with the sound files that were added to

the catalog since the last time the catalog was saved.

“File Name” could not be saved. Disk is locked.

The file, whose name is indicated by

File Name

, could not be saved

because the disk is software locked.

Some other process has locked the required disk. This is possible if you

are using MultiFinder or System 7 or a Macintosh (not MIDI) network.

Save the file on an unlocked disk using the File menu’s

Save As

command, or quit the other applications in MultiFinder or System 7 and

repeat the process.

“File Name” could not be saved. Disk is write protected.

The file, whose name is indicated by

File Name

, could not be saved

because the disk is write protected.

If a floppy disk is write protected, first eject the disk then slide the write-

protect tab on its back so that you can’t see light through it. If a hard disk

is write protected, consult your hard disk’s manual.

“File Name” could not be saved. File is locked.

The file, whose name is indicated by

File Name

, could not be saved

because the file is locked.

First, use the File menu’s

Save As

command to save your information

using another file name, then quit the SP-12 Librarian. In The Finder, click

the locked file and select

Get Info

in the File menu. Click the “Locked” box

to remove the “X”, thereby unlocking the file. The file is now unlocked. You

might as well delete it, since your information was saved in another file.

“File Name” could not be saved. I/O error.

The file, whose name is indicated by

File Name

, could not be saved

because a serious disk error has occurred. Your disk, or disk drive could

be damaged.

Try the same operation again. If you can’t reproduce the problem, it was

probably just a temporary glitch. Keep your guard up in case it happens

again.

If you do reproduce the problem, or if it comes up again at another time,

suspect the disk first. Try to use the File menu’s

Save As

command to

save your information using a different file name or on another disk, then

quit the SP-12 Librarian.

For floppy disks, use The Finder to copy valid files to another floppy. Don’t

back up the floppy, since you may back up the fault with it. Discard the

bad floppy disk. With hard disks, remove all your valid data, re-format the

hard disk, then copy your files back onto the hard disk.

If the problem persists on a specific drive, have it checked out by a service

technician.

An open file is using this name.

The name you specified can’t be used because the SP-12 Librarian

already has a file opened using the same name. Use another file name.

Can't add sounds to catalog. No samples in this file.

The

Add Sounds To Catalog

command could not do anything because

there are no RAM samples in the active window. At least 1 sample must

exist in a sound file for it to be added to the Sound Catalog.

Can't create work file -- All names used.

A work file can’t be created because all possible work file names already

exist as files on that disk.

Quit the SP-12 Librarian and return to The Finder. Check the disk

containing the file that you wanted to update for a file named “SP-12

Librarian #1”. If you renamed the SP-12 Librarian program, the name

SP-12 Librarian

will be replaced by the program’s name. Remove that file

by dragging it to the trash. Do the same for files named “SP-12 Librarian

#2” through “SP-12 Librarian #99”, since these are all work files that can

be removed. Note that the work files

may

be on your startup disk.

Can't find “SP-12 Catalog” file. Do you want to look for it, or create a new

Catalog?

The SP-12 Librarian can’t find the Sound Catalog file, and needs to know

if you want to search for it, or create a new one (

Find

and

New

buttons will

be available.)

Read the section in

Using The SP-12 Librarian

that applies to the

operation you just attempted:

Show Catalog

Add Sounds To Catalog

Can't read blank or damaged file.

The SP-12 can’t read a file that is blank or damaged. It can only read a

sound file or sequence file.

Can't save sequences in a sound file.

The SP-12 can’t save sequence data in a sound file. Sequence data can

only be saved in a sequence file, a blank file, or a damaged file.

Can't save sounds in a sequence file.

The SP-12 can’t save sound data in a sequence file. Sound data can only

be saved in a sound file, a blank file, or a damaged file.

Cassette/Disk

Write Protected

This message appears only on the SP-12’s control panel. It indicates that

the SP-12’s data can't be written to the file for one or more of the following

reasons:

(1) The file is locked: If this is the case, quit the SP-12 Librarian. In The

Finder, click the locked file and select

Get Info

in the File menu. Click the

“Locked” box to remove the “X”, thereby unlocking the file. The file is now

unlocked.

(2) The disk is write protected: If a floppy disk is write protected, first eject

the disk then slide the write-protect tab on its back so that you can’t see

light through it. If a hard disk is write protected, consult your hard disk’s

manual.

(3) The disk is locked: Some other process has locked the required disk.

This is possible if you are using MultiFinder or System 7 or a Macintosh

(not MIDI) network. Create a new file on an unlocked disk, or quit the

other applications in MultiFinder or System 7 and repeat the process.

Cassette/Disk

DataRead Error

This message appears only on the SP-12’s control panel. The SP-12

Librarian has had a problem, the nature of which is described in the

“SP-12 Link” window. This message is also displayed if the SP-12

operation is halted by pressing “No” on the SP-12, or clicking the SP-12

Librarian’s Cancel button.

1 2 ... 14 15 16 17 18 19 20 21 22 23

Kommentare zu diesen Handbüchern

Keine Kommentare

E-Mu SP-12 Bedienungsanleitung Seite 19

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Musikinstrumente E-Mu SP-12