E-Mu SP1200 Bedienungsanleitung PDF herunterladen (Seite 88)

APPENDIX

APPENDIX I: CASSETTE/MIDIDISK OPERATION

The SP-1200 Cassette/MidiDisk Interface allows users to transfer sequence and sound data

from SP-12 units to the SP-1200 using either the cassette interface of the SP-12 or products

using the JL Cooper MidiDisk format. To transfer data from Commodore 1541 diskettes,

load the data into the SP-12 and transfer using the Cassette OUT of the SP-12 into the

SMPTE IN of the SP-1200.

To activate the SP-1200 Cassette/MidiDisk Interface:

Power up the SP-1200 holding down the disk button, or press the disk button before a

software diskette has been inserted. You will see the display:

1 = Cassette

2 = MidiDisk

Press the appropriate button for the transfer you wish to perform. You will see the display:

1 = Seqs 2 = Snds

3 = MakeDsk

Load the sequences and/or sounds into the SP-1200 by selecting the proper code and

following the prompted instructions. Press ENTER to return to the menu.

When you have loaded the sequences and sounds into the instrument, insert a previously

formatted SP-1200 diskette and press 3 to over-write both the sequences and sounds onto

the diskette. EVEN IF YOU HAVE NOT LOADED SOUNDS OR SEQUENCES, BOTH

WILL BE OVERWRITTEN.

You may now transfer other cassette or MidiDisk data, or re-boot the instrument normally

to utilize the transferred data. You will normally add these sounds to others, as the SP-12

ROM sounds are not transferred through this process. You will also need to name your

sounds using the SP-1200 sound naming feature.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 102 103

Keine Kommentare

E-Mu SP1200 Bedienungsanleitung Seite 88