E-Mu SP1200 Bedienungsanleitung PDF herunterladen (Seite 24)

RECORDING SEGMENTS

2A RECORDING A SEGMENT: OVERVIEW

There are two ways to record a segment, real time and step time. In both cases, recording

initially consists of:

1. Programming the metronome (if necessary).

2. Erasing previously recorded sounds (if necessary).

3. Defining the segment’s time signature and the number of measures in the segment

(“dimensioning” the segment).

4. Setting Auto Correct (to correct for timing errors in real time recording; this also

determines the step rate in step time recording, and the repeat rate when recording

repetitive “drum rolls” as described in Section 2F).

5. Selecting the desired bank of drum sounds for recording (this may be changed at

any time during the recording process).

6. In real time, entering record mode and playing drum sounds (the SP-1200’s memory

remembers what you play) in time with the metronome; in step time, entering

record mode and stepping through each step of the segment, playing drum sounds

as required at the various steps. While in real time, you can record pitch changes,

enter/exit multipitch or multilevel mode, change Auto Correct, change tempo, or

switch banks if desired.

7. After recording the segment, you can make changes with either real time or step

time editing.

We have already covered the first step in recording (programming the metronome), as well

as the fifth step (selecting different drum sounds). Now let’s cover the remaining steps in

the order given above.

2B ERASING A SEGMENT

Erasing a segment clears out all existing drum sounds in that segment, and automatically

re-dimensions the segment to two measures of 4/4. Before erasing a segment, always check

whether that segment already contains something you want to keep. To erase:

1. Stop the SP-1200, confirm that you are in segment mode, and press ERASE.

2. The display helpfully mentions that you can erase either a sound or segment. Eras-

ing a sound will be covered later; to erase a segment, enter the two-digit segment

number. The display will replace the flashing cursor with the number you entered,

and ask you to confirm that this is the segment you want to erase.

3. If this is the segment to be erased, press YES. If not, press NO and the

SP-1200 will return you to step 2.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 102 103

Keine Kommentare

E-Mu SP1200 Bedienungsanleitung Seite 24