E-Mu SP1200 Bedienungsanleitung PDF herunterladen (Seite 41)

CREATING A SONG

3D ENDING A SONG

After programming your song, you have several ways to end it. This assumes that you’ve

already entered all the segments, and that you are one step past the last step in which you

entered a piece of song data (for example, if you’ve entered eight segments, the display’s

lower line should now show Step 9:). Here are your options:

1. To repeat the song indefinitely (loop the song), press END (a flashing cursor will

appear after End), then press REPEAT. The display’s lower line will indicate that this

step will continuously “loop” the song.

2. To link the end of your first song to the beginning of another song, press END (a

flashing cursor will appear after End), then key in the two-digit number of the song

you want to link. The display’s lower line will confirm your choice by saying “Link

(song number)”.

3. To stop the SP-1200 completely after the song, press END (a flashing cursor will

appear after End). Press END a second time; the flashing cursor will disappear, and

the display’s lower line will show End to confirm that the song ends at this step.

Note: Entering End at step 1 of the song (in other words, pressing END twice as described

above in paragraph 3) erases the song. The display will ask “End Here? Yes/No” to check if

you really want to do this. If you do, press YES.

3E EDITING SONGS (STEPPING, INSERTING, DELETING)

1. Stepping: To change a song step, locate the step with the Right Arrow and Left

Arrow buttons. Pressing Right Arrow increases the step number, Left Arrow de-

creases the step number. Tap either key once to move one step at a time, or hold

either key down for a “fast forward” or “fast backward” effect. When you reach the

step you want to change, simply key in the new information.

2. Inserting: Inserting creates an additional step (or steps) in an existing song. Con-

sider a situation where you want to insert another segment in a song right after step

4. First, press Right Arrow or Left Arrow until you reach step 5 (the step which is

right after step 4). Press INSERT. Two things happen: This step becomes available for

entering a song step, and all subsequent steps are automatically renumbered to

reflect the addition of the inserted step (for example, what used to be step 5 now

becomes step 6, step 6 becomes step 7, step 7 becomes step 8, etc.). You may now key

in the instruction for the new step 5 (in this case, it would be a segment number).

After entering the instruction, press ENTER to enter the instruction into the SP-

1200’s memory, unless you want to add more steps. In that case, press INSERT again

to add another insert, and continue as described above.

3. Deleting: Move to the step you want to delete (let’s choose step 8 as an example) by

using the Right Arrow and Left Arrow keys. When step 8 appears in the left-hand

readout, press DELETE. The current step 8 is deleted, and all subsequent steps are

automatically renumbered to reflect the deletion of this step (step 9 becomes the new

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 102 103

Keine Kommentare

E-Mu SP1200 Bedienungsanleitung Seite 41