E-Mu SP1200 Bedienungsanleitung PDF herunterladen (Seite 93)

APPENDIX

If response is a NAK, SP 1200 will try sending the same packet again.

- If no response at all, SP 1200 will assume an “open loop” system and continue the

dump.

- If response is anything else, it is bad, and SP 1200 will display “Sound Dump

Bad, Press Enter”, then send a CANCEL command, and abort back to normal SP

1200 operation.

• SP 1200 will continue sending packets, getting an ACK for each one, until it has sent

the entire dump, as specified by the “sound length” in the Sample Dump Header.

• The last packet will always contain 120 data bytes, even if there may be fewer than

that remaining in the sound. The remaining bytes will be filled in with garbage data

and should be ignored.

• After sending the last packet, SP 1200 displays “Sound Dump Good Press Enter”,

and returns to normal operation.

• Every 8 packets sent, SP 1200 will toggle an asterisk on the LCD.

MMA Sample Dump Header f0 system exclusive

0c MIDI base channel (0 to 15)

01 MMA exclusive number

ss sample number lsb (0 to 31)

00 sample number msb (always 0)

0c significant bits (12)

02 sample period (lsb) in nsec

2c sample period (nsb)

02 sample period (msb)

LL sample length (lsb) in words

LL sample length (nsb)

LL sample length (msb)

ss sustain loop start word (lsb)

ss sustain loop start word (nsb)

ss sustain loop start word (msb)

ee sustain loop end word (lsb)

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 102 103

Keine Kommentare

E-Mu SP1200 Bedienungsanleitung Seite 93